Rectifying Faults; After-Sales Service And Application Service - Bosch GAS Professional 12-25 Manual De Instrucciones

Rectifying faults

Problem
The suction turbine will not switch on. – Check the mains cable, mains plug, fuse and socket.
The suction turbine will not switch on
again after the container has been
emptied.
The suction power is decreasing.
Dust is escaping during extraction
Automatic switch-off (wet extraction)
is not working.
The automatic filter cleaning function
is not working

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Bosch Power Tools
If a fault (e.g. a filter damage) occurs, the vacuum
u
cleaner must be switched off immediately. The fault
must be repaired before resuming operation.
Corrective measures
GAS 12-25 PL:
The mode selector switch (1) is set to "automatic start/stop".
– Set the mode selector switch (1) to the "vacuuming" symbol or switch on the
power tool plugged into the electric socket (2).
– Switch the vacuum cleaner off and wait five seconds before switching it back on.
– Empty the container (7).
– Remove any blockages from the vacuum nozzle, suction tube (26), vacuum hose
(15) or main filter (20).
– Change the plastic bag (19) or dust bag.
– Make sure the filter holder (28) is engaged correctly.
– Place the top part of the dust extractor (10) on correctly and close the catches
(9).
– Change the pre-filter (22), main filter (20) or wet filter (21).
– Check that the main filter (20) has been fitted correctly.
– Change the main filter (20).
Automatic switch-off will not work in the presence of non-conductive liquids or foam-
ing.
– Check the fill level regularly.
– Empty the container (7).
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
English | 15
1 609 92A 4S3 | (04.04.2019)