Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

A

RADIO OPERATION

1
Press RADIO/BAND* repeatedly to select
the desired band.
FM
The power is turned on and the previously tuned
station is received.
* or BAND on the remote control (applicable
when the AC cord is connected)
2
Press r, t (TUNING DOWN, UP) to
select a station.
During FM stereo reception,
After listening, press TAPE/POWER/6STANDBY to
turn the power off.
For better reception
FM
SW1
SW2
Extend the rod antenna
and orient it for the best
reception.
For quick tuning (Auto Search)
Keep r, t pressed until the tuner starts
searching for a station. When a station is tuned to, the
search stops.
If the broadcast signal is weak, it does not stop. To
stop the search manually, press r or t.
• When tuning to SW stations by Auto Search, the
frequencies are tuned to through 5 kHz tuning
intervals.
• SW stations out of the meter bands cannot be tuned
to by Auto Search.
6
ENGLISH
MW
SW1
SW2
is displayed.
MW
The antenna is inside the
unit. Position the unit for
the best reception.
REPEAT/SLEEP/FM MODE/OSC*
- If an FM stereo broadcast contains noise, press the
button so that
is displayed.
Noise is reduced, although reception is monaural.
To restore stereo reception, press the button again.
- If a high-pitched sound is heard during MW recording,
press the button repeatedly until the noise is reduced.
Its position can be checked by "•" being on or off the
display.
* or MODE on the remote control
To change the MW tuning interval
The default setting of the MW tuning interval is 9 kHz/
step. If you use the unit in an area where the frequency
allocation system is 10 kHz/step, change the interval as
follows.
1 Press RADIO/BAND to display FM.
2 Press s while pressing RADIO/BAND to display the
MW frequency.
When the MW tuning interval is changed, the preset
stations are cleared.
NOTE
If the unit picks up noise from other electrical
appliances nearby, like a TV or fluorescent lights, move
the unit.
Frequencies on shortwave (SW) meter bands
Each meter band corresponds to the frequencies.
Meter band
SW1
90 m
75 m
60 m
49 m
41 m
SW2
31 m
25 m
11.650 - 12.050 MHz
22 m
13.600 - 13.800 MHz
19 m
15.100 - 15.600 MHz
16 m
17.550 - 17.900 MHz
13 m
21.450 - 21.850 MHz
Frequencies
3,200 - 3,400 kHz
3,900 - 4,000 kHz
4,750 - 5,060 kHz
5,950 - 6,200 kHz
7,100 - 7,300 kHz
9.500 -
9.900 MHz

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Aiwa ca-dw50

Tabla de contenido