Mitsubishi Electric PAR-W21MAA Manual De Instrucciones página 23

1. Water Temp Heating
2. Water Temp Heating ECO No.1 : Sets the water temperature to 2°C for an outside air temperature of 3°C when operating in Heating ECO mode.
3. Water Temp Heating ECO No.2 : Sets the water temperature to 4°C for an outside air temperature of 5°C when operating in Heating ECO mode.
4. Water Temp Hot Water
5. Water Temp Anti-freeze
6. Water Temp Cooling
7. Temp Offset Heating
8. Temp Offset Cooling
4 Switch the outside air temperature or water temperature setting by pressing the [
5 To set the water temperature, outside air temperature, or offset amount, press the [
The adjustment range is as shown below.
Water Temp Hot Water (Heating, Heating ECO)
Water Temp Anti-freeze
Water Temp Cooling
Outside air temperature
Temp Offset Heating (Cooling)
*1 The adjustment range differs depending on the model of the unit to connect.
6 To cancel the water temperature initial setting, press the [INITIAL SETTING (
ON/OFF] I button.
Alternatively, press the [
: Sets the water temperature to 1°C when starting operation in Heating mode.
: Sets the water temperature to 6°C when starting operation in Hot Water mode.
: Sets the water temperature to 7°C when starting operation in Anti-freeze mode.
: Sets the water temperature to 8°C when starting operation in Cooling mode.
: Sets the offset amount of the Heating system to 9°C.
: Sets the offset amount of the Cooling system to 0°C.
: 20°C ~ 90°C (68°F ~ 194°F)
: 5°C ~ 45°C (41°F ~ 113°F)
: 5°C ~ 30°C (41°F ~
: -20°C ~ 40°C (-4°F ~ 104°F)
: -15°C ~ 15°C
ON/OFF] D button.
TEMP. ( ) or (
*1
*1
87°F) *1
(5°F ~ 59°F)
)] J button for three seconds or longer.
– 23 –
)] F (setting temperature) button.