Publicidad
Idiomas disponibles
Idiomas disponibles
usiNg prOvidEd 4mm AllEN wrENch, TighTEN cApscrEws cOmplETEly.
Hand tighten until lock washer
is seated and pad fits firmly
into track. Tighten to final
torque (30in-lbs or 3.4Nm) .
REAd thESE wARningS!
Be sure the towers, with bars
installed, seat completely on the
Landing Pad. If they do not seat
properly, repeat step 6, making
sure the base and skirt are
aligned before re-tightening.
Continue with Control Tower or SkyLine Tower installation.
1035789B-3/9
Be sure all hardware is secured
according to instructions. Failure to
perform safety checks before driving
away can result in property damage,
personal injury, or death.
Attachment hardware can loosen over
time. Check and tighten if necessary,
before each use.
frONT lEfT Of vEhiclE
• do not EXCEEd wEight limit:
165 lbs. (75 kg)
• Consult your YAKimA dealer or
fit list to see load limitations for
accessories.
Remove your YAKIMA rack and
accessories before entering automatic car
washes.
X4
Publicidad
