GE 840173101 Manual De Instrucciones página 4

840173101 Ev01 1/18/08
1. Plug iron into outlet.
2. Turn Adjustable Steam to Dry Iron.
3. Set Fabric Setting Indicator to desired temperature. Allow three minutes for iron to
reach desired temperature.
4. To turn iron off, set Fabric Setting Indicator to OFF (O) and unplug iron.
1. Unplug iron. Open water tank fill cover. Using a cup, slowly pour 10 ounces (310 ml)
of tap water into the water tank opening. Close water tank fill cover.
2. Plug in iron.
3. Press Temperature Selector. With iron in an upright position, set Fabric Setting
Indicator to desired setting in steam range. Allow 3 minutes for iron to reach desired
temperature. Do not preheat the iron with the soleplate facing down.
4. Set Adjustable Steam to desired steam output.
5. To turn iron off, turn Adjustable Steam to Dry Iron. Press Temperature Selector.
Set Fabric Setting Indicator to OFF (O) and unplug iron.
6. Empty water from the iron following directions in "Caring for Your Iron and Soleplate."
Water
Please use ordinary tap water. If you have extremely hard water, alternate between
tap water and distilled water for use in the iron.
Steam
Temperature Setting
Setting
Off
Nylon
Acrylic
Silk
Polyester
Rayon
Wool
Cotton
Linen
4
9:27 AM Page 4
TO DRY IRON
TO STEAM IRON
FABRIC SETTING CHART
Ironing Instructions
0
1
Dry iron on reverse side of fabric.
2
Dry iron on reverse side of fabric.
2
Dry iron on reverse side of fabric.
3
Iron while fabric is still damp.
4
Iron on reverse side of fabric.
4
Steam iron on reverse side of fabric.
5
Iron while still damp using steam and/or spray.
6
Iron on reverse side of fabric while still damp.