DP750 Web CONFIGURATION
When the DP750 Network icon shows a solid blue light (mean-
ing the network is ready), the user can configure the DP750
by navigating to its IP address via browser.
If a DP720 is successfully paired with the DP750, the user can
obtain the IP address of the DP750 as follows.
Steps to obtain DP750 IP address via paired DP720:
1. Press "Menu"(left softkey) to bring up operation menu.
2. Press Arrow(Up, Down, Left, Right) keys to move the cursor to
"Setting" icon, then press "Select"(left softkey).
3. Press Up arrow key to navigate to "Info", then press "Select".
4. The LCD screen will display information about the DP720.
Using Arrow keys, move the cursor down to view the IP
address of the DP750
5. Type the IP address of DP750 into the browser.
6. The default username and password for administrator are
"admin" and "admin".
~7~
NOTE:
Following information required to configure DP750:
• IP address, subnet mask and gateway IP if using static IP
(default via DHCP).
• SIP server and/or Outbound Proxy FQDN or IP address.
• User(subscriber) information: User ID, Authentication ID,
Password, etc.
• DP750 supports "Plug-n-Call" if the ITSP (Internet Telephony
Service Provider) provides automatic provisioning service.
Please ensure the DP750 has an internet connection (either
DHCP or static IP on an internet ready network) if the feature
is enabled. It will be configured automatically by remote
servers of the ITSPs when powering up the DP750.
• Please contact your ITSPs for additional settings that may
be necessary to configure the DP750.
Please download the User Manual and check out the
FAQ for more detailed instructions:
http://www.grandstream.com/products
This product is covered by one or more of the U.S. patents (and any foreign patent
counterparts thereto) identified at www.cmspatents.com.
~8~