Technical Specifications - Stiga GM Li 7.2 Manual De Uso Y Mantenimiento

1. Technical Specifications
Model
Battery voltage/operation voltage
Battery type
Charging current
Charging time
Operating time
Weight
Noise pressure level
Vibrations
Accessories
Grass cutting blade (GM GB8, GM GB10, GM GB13)
Cutting movements
Cutting width
Shrub cutting blade (GM SB18, GM SB20)
Cutting movements
Cutting length
Cutting thickness
Pruning cutter (GM PD)
Saw blade diameter
Saw blade rotation speed
Grubber (GM RK)
Working motion
Working wide
• The specified vibration emission value was measured by a standardized test methods and can compare with other
power tools are used.
• The specified vibration emission value can also be necessary for the assessment of work breaks are used.
• The specified vibration emission value can vary during the actual use of the electric tool by specifying the value,
depending on the way how to use the power tool.
• Note: You create the privilege against vascular pulsations of the hands in time breaks.
• Try to keep the stress due to vibration as low as possible. For example, measures to reduce vibration stress are
wearing gloves when using the tool and limiting the work time. All phase of the operating cycle must be considered
in this regard, (for example, times when the power tool is switched off, and times when the power tool is switched
on but is not running under load).
• Always keep hands and feet away from the cutting tools, particularly when switching on the motor!
EN | Operating Instruction
V/DC
Lithium-Ionen
mA
h
min
kg
dB (A)
2
m/s
-1
min
mm
-1
min
mm
mm
mm
-1
min
min -1
mm
GB-2
GM Li 7.2
7,2
2,5 Ah
380
3-5 Std.
~ 80
0,58
75,7
K=3,0 dB (A)
< 2,5
K=1,5 m/s
1000
80, 110, 130
2000
180, 200
max. 8
65
200
1000
95
GM Li 10.8
10,8
500
~ 100
0,65
2