Safety Instructions - Epson ELPMB47 Manual Del Usuario

Safety Instructions

Read this document carefully to assemble and install this product safely and correctly. Be sure to
follow the safety precautions. Keep these instructions close to hand to help solve any points you
do not understand.
So that you can use the product safely and correctly, symbols are applied in this guide and on
the product to indicate possible harm to the user or to others and the risk of damage to
property. The indications and their meaning are as follows. Make sure you understand them
properly before reading this guide.
Warning
Caution
Carefully read the warnings in "Safety Instructions / Support and Service Guide" supplied with
your projector before starting the installation to determine a suitable place to install it.
v The installation work should be performed only by specialists with the required technical
know-how and ability.
Incomplete assembly or installation could cause the projector and ceiling mount to fall and cause
injury.
v This product weighs approximately 11 kg. When transporting or moving the product,
handle it with care to avoid injury.
v Do not install the ceiling mount on an inclined or weak surface.
The ceiling must be strong enough to install the projector and ceiling mount. Before starting the
installation, carefully check the weight of the projector and the ceiling mount. Make sure the
ceiling is strong enough and use the most appropriate methods to prevent the projector from
falling.
v Do not install the product in a location where it might be exposed to vibration or shock.
Otherwise the product or the installation surface could be damaged. If the product falls, it could
result in death or personal injury.
This symbol indicates information that, if ignored, could possibly
result in death or personal injury due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Warning
21