Safety Instructions; Explanation Of Symbols; Safety Precautions For Installation - Epson ELPMB29 Manual Del Usuario

Safety Instructions

For your safety, read all the instructions in this guide and the User's Guide on your projector CD before using
this product. Incorrect handling that ignores instructions in these guides could damage the product or could
result in personal injury or property damage. Keep this guide at hand for future reference.

Explanation of Symbols

The symbols shown below are used throughout this guide to prevent personal injury or property damage.
Make sure you understand these warnings when reading this guide.
This symbol indicates information that, if ignored, could possibly result in personal injury or even death
Warning
due to incorrect handling.
This symbol indicates information that, if ignored, could possibly result in personal injury or physical
Caution
damage due to incorrect handling.
This symbol indicates relevant or useful information.
This symbol indicates an action that
must not be done

Safety Precautions for Installation

Follow the instructions in this guide when installing the product.
If the instructions are not followed, the mount may fall or collapse, resulting in personal injury or an accident.
Handle the power cord carefully.
Incorrect handling may cause fire or electric shock. Observe the following precautions when handling:
- Do not handle the power plug with wet hands.
- Do not use a power cord that is damaged or modified.
- Do not pull the power cord with too much force when passing it through the base frame unit.
Do not install this product in a place where it might be subjected to vibrations or shock.
Vibrations or shock could cause damage to the projector or mounting surface. It could also cause this mount or projector
to fall and cause serious personal injury or even death.
Inspect this product on a regular basis to ensure there are no broken parts or loose screws.
If there are any broken parts, stop using the mount immediately. Otherwise, the mount may collapse and the projector
may fall, causing damage or personal injury.
Never modify this product.
Tighten all screws firmly after installation.
Otherwise, the mount may collapse and the projector may fall, causing damage or personal injury.
Install this product on a table that meets the following conditions.
- The tabletop is 0.6 to 3.1 inches (15 to 80 mm) thick.
- The tabletop is strong enough to support the weight of the mount.
- The table is stable enough not to collapse after installation of the mount (legs are not pointing inwards or collapsible, for
example.).
- The table is strong enough to support the weight of the projector and the mount.
Do not use screw-locking adhesives, lubricants, or oil to install this product on a table.
If you use screw-locking adhesives, lubricants or oil on the projector's attachment plate, the case may crack and cause the
projector to fall, resulting in personal injury or property damage.
Do not lean against or apply any force to the table mount or projector.
Otherwise, the table mount or projector may fall or collapse and cause an accident or personal injury.
This symbol indicates an action that
should be done
Warning
3