Solving Problems - Philips Vision Excel HR8893/15 Manual De Instrucciones

See the worldwide guarantee leaflet for telephone numbers of the
Philips Helpdesk.
Replacement
If the mains cord of this appliance is damaged, it must always be
replaced by Philips or a service centre authorised by Philips, as special
tools and/or parts are required.

Solving problems

The suction power is insufficient:
1 Check if the suction power control is in the required position
(see the section on vacuum cleaning - adjusting suction power).
2 Check if the dustbag is full. If necessary, replace the dustbag.
3 Check if the nozzle, tube or hose is blocked up.
To remove the obstruction, disconnect the blocked-up item and
connect it (as far as possible) in reverse position. Switch the vacuum
cleaner on to make the airflow suck the obstructing material out of the
blocked-up item.
The infrared remote control does not function:
The batteries are empty.
C
4 Replace the batteries (make sure the - and the + poles of the
new batteries are pointing in the right direction). Use LR03
batteries, preferably alkaline batteries.
ENGLISH
11