Italtecnica Nettuno 2.0 Manual De Instrucciones página 50

 MAINTENANCE:
Nettuno is designed to keep maintenance requirements at a minimum. To guarantee the device a long working life
and perfect functionality, always follow the instructions below:
- every 12 months, clean the cooling fans and ensure their correct operation. In particularly dusty
environments, reduce the frequency to 6 months
- if the pump is equipped with intake filters, carry out regular checks to ensure they are clean;
- always ensure that the cover is closed properly and the cable clamps are tight to prevent dust from penetrating
from outside;
- switch off the power supply and drain the water from the system when it is going to be left unused for a long time;
- do not carry out any operations when the device is open
- wait 10 minutes before removing the cover from the device so the capacitors can discharge.
WARNING: this device does not contain any parts that can be repaired or replaced by the end
user. You are therefore advised not to remove the electronic card's protective cover electronic board
protective cover as this would render the warranty null and void!
Installation date
..../..../.......
Pump
make/model
Nettuno serial n.
Stamp
Installer
50