VONROC CT501AC Manual Del Usuario página 8

EN
Felt wheels (Fig. E)
The felt wheels should be screwed on the mandrel.
Material
Steel
Aluminium, brass
Plastic
Sanding bands and disc (Fig. F)
Material
Wood
Steel
Aluminium, brass
Plastic
High speed cutter, Diamond wheel point and Drill
(Fig. G)
Material
Stone, shell
Steel
Aluminium, brass
Plastic
Stainless steel brushes and bristle brush (Fig. H)
Only for S_CT501AC
Material
Stone, shell
Aluminium, brass
4. MAINTENANCE
Make sure that the machine is not live
when carrying out maintenance work on
the motor.
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that
the ventilation openings are free of dust and
dirt. Remove very persistent dirt using a soft
cloth moistened with soapsuds. Do not use any
solvents such as gasoline, alcohol, ammonia, etc.
Chemicals such as these will damage the synthetic
components.
8
ENVIRONMENT
Speed setting
+
+ -
Only for EC countries
+
Do not dispose of power tools into domestic waste.
According to the European Guideline 2012/19/EC
for Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that
Speed setting
are no longer usable must be collected separately
+ +
and disposed of in an environmentally friendly way.
-
WARRANTY
+ -
-
VONROC products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
Speed setting
failure during this period due to defective material
Max
and/or workmanship then contact VONROC directly.
+ -
The following circumstances are excluded from this
+ +
guarantee:
-
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers;
• Normal wear and tear;
• The tool has been abused, misused or
Speed setting
improperly maintained;
+ -
• Non-original spare parts have been used.
+ -
This constitutes the sole warranty made by company
either expressed or implied. There are no other war-
ranties expressed or implied which extend beyond
the face hereof, herein, including the implied war-
ranties of merchantability and fitness for a particular
purpose. In no event shall VONROC be liable for any
incidental or consequential damages. The dealers
remedies shall be limited to repair or replacement of
nonconforming units or parts.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.
Faulty and/or discarded electrical or
electronic apparatus have to be collected at
the appropriate recycling locations.
WWW.VONROC.COM