Emporio Armani AR2434 Manual De Instrucciones página 16

CHRONOGRAPH 2 eYe
CENTER STOP-SECOND
MINUTE COUNTER
Setting the time
1. Pull crown out to position 3 (the watch stops).
2. Turn crown until you reach the correct time.
3. Push crown back to position 1.
Setting the date
1. Pull crown out to position 2 (the watch continues to run).
2. Turn crown until yesterday's date appears.
3. Pull crown out to position 3 (the watch stops).
4. Turn crown until correct date appears.
5. Continue to turn crown until correct time appears.
6. Push crown back to position 1.
Chronograph
• The minute counter measures 30 minutes per rotation.
• The center stop-second measures 60 seconds per rotation.
Please note:
Before using the chronograph functions, please ensure that:
- the crown is in position 1 (= normal position).
- the two chronograph hands are precisely at zero position following
activation of pusher B. Should this not be the case, the positions of
the hands must be adjusted (see the chapter entitled "Adjusting the
chronograph hands to zero position").
30
A
SECOND HAND
1 2 3
B
Chronograph: basic function
(Start / Stop / Reset)
1. Press pusher A to start the center stop-second hand.
2. To stop the timing, press pusher A again.
3. To reset the two chronograph hands to zero positioning, press
pusher B.
Chronograph: Intermediate or interval timing
1. Press pusher A to start the center stop-second hand.
2. Press pusher B to stop the chronograph.
NOTE: Although the chronograph hands have stopped, the
movement continues to record the current timing.
3. Make up the measured time:
Press pusher B again and the 2 chronograph hands are quickly
advanced to the ongoing measured time. To continue to record
intervals, continue to push pusher B.
4. Press pusher A to stop and the final time is displayed.
5. To reset the two chronograph hands to zero positioning, press
pusher B.
Adjusting the chronograph hands to zero position
1. Pull crown out to position 3 (the two chronograph hands are in
their correct or incorrect zero position).
2. Keep pushers A and B depressed simultaneously for at least 2
seconds (the center stop-second rotates by 360° - corrective
mode is activated).
3. Press pusher A to single step the center stop-second hand. Press
and hold pusher A to advance the center stop-second hand
quickly. Press pusher B to advance to the next hand.
4. Press pusher A to single step the minute counter hand. Press and
hold pusher A to advance the minute counter hand quickly.
5. Return the crown to position 1.
31