Emporio Armani AR2434 Manual De Instrucciones página 17

CHRONOGRAPH 2 eYe
CHRONOGRAPH
SECOND HAND
CHRONOGRAPH
MINUTE HAND
HOUR HAND
SECOND HAND
Time Setting
1. Pull crown out to position 3.
2. Turn crown to set the desired time.
3. Return crown to position 1.
date Setting
1. Pull crown out to position 2 (the watch continues to run).
2. Turn crown until yesterday's date appears.
3. Pull crown out to position 3 (the watch stops).
4. Turn crown until correct date appears.
5. Continue to turn crown until correct time appears.
6. Return crown to position 1.
Chronograph Operation
1. Press A to start/stop the chronograph.
2. Press B for reset.
Adjusting the Chronograph
1. Pull crown to position 3.
2. Press A to reset the second hand to "0."
3. Press B to reset the chronograph minute hand.
4. Return crown to position 1.
32
A
MINUTE HAND
1 2 3
DATE
B
CHRONOGRAPH STOPWATCH
MINUTE HAND
SECOND HAND
Time and date Setting
1. Before setting the time, make sure the chronograph is stopped
and set to zero (12:00) position.
2. Pull crown out to position 2.
3. Turn crown clockwise until the previous day's date is displayed.
4. Pull crown out to position 3 when the second hand is at the
12:00 position.
5. Turn crown to set time.
NOTE: 24-hour hand moves correspondingly with the hour and
minute hands. When setting the time be sure to check that the
24-hour hand is set properly.
6. Return crown to position 1.
NOTE: When the crown is in position 2, do not press the
pushers. Otherwise the chronograph hands will move.
Chronograph
1. Press A to start/stop the chronograph.
2. Press B to reset to zero.
Split Time
1. Press B while the chronograph is running.
2. Press B again to return to the chronograph.
3. Press A to finalize timing.
4. Press B to reset.
Chronograph zero Reset
1. If either of the chronograph hands is not at the zero (12:00)
position, pull crown out to position 3.
2. Press A to move hands clockwise; press B to move hands
counter-clockwise.
3. Return crown to position 1.
A
24-HOUR HAND
1 2 3
B
33