Kit Assembly; Ddin Radio Provision - Metra 99-7626HG Instrucciones De Instalación

ISO DIN radio provision
1. Attach the supplied (2) white panel clips to
the radio housing trim panel
2. Remove the metal "DIN" sleeve and trim
ring from the aftermarket radio.
3. Secure the included radio brackets to the
radio using the screws supplied with the
radio. (Figure A)
4. Mount the pocket to the bracket assembly
with the (4) #8 x 3/8" Phillips screws
supplied. (Figure A)
5. Mount the climate control module to
the bracket assembly below the radio and
pocket, using the hardware removed
during disassembly. (Figure B)
6. Locate the factory wiring harness and
antenna plug in the dash and make all
necessary connections to the radio and
climate control module. Metra recommends
using the proper mating adapters from
Metra and/or AXXESS.
7. Mount the new radio assembly into the dash
using the factory hardware and reassemble
the dash in the reverse order of disassembly.
99-7626HG

Kit Assembly

(Figure A)
(Figure B)

DDIN radio provision

1. Attach the supplied (2) white panel clips to
the radio housing trim panel
2. Secure the included radio brackets to the
radio using the screws supplied with the
radio. (Figure A)
3. Mount the climate control module to
the bracket assembly below the radio,
using the hardware removed during
disassembly. (Figure B)
4. Locate the factory wiring harness and
antenna plug in the dash and make
all necessary connections to the radio
and climate control module. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
5. Mount the new radio assembly into the
dash using the factory hardware and
reassemble the dash in reverse order of
disassembly.
3
(Figure A)
(Figure B)