Dash Disassembly - Metra 99-7626HG Instrucciones De Instalación

1. Remove top trim above climate
control panel and remove the
exposed Phillips screw holding the
climate control panel. (Figure A)
2. Unclip and remove climate control
panel. (Figure B)
3. Remove (2) Phillips screws at the
top of the radio trim bezel.
(Figure C)
4. Remove trim panel under the
radio and remove the (2) exposed
Phillips screws securing the radio.
(Figure D, E)
99-7626HG

Dash Disassembly

(Figure A)
(Figure B)
(Figure C)
5. Remove (4) Phillips screws securing
the metal brace above the radio.
(Figure F)
6. Unclip, unplug and remove the radio.
7. Remove the (2) T-20 Torx screws
holding the climate control module
to the factory radio bracket
assembly, and set aside for
kit assembly.
Continue to kit assembly
2
(Figure D)
(Figure E)
(Figure F)