EINHELL A-S 360 EK Manual Del Usuario página 7

S-Hinweise Stichsaege_Bauhaus:_
condition. Replace bent and cracked saw blades
immediately.
After switching off the saw, do not press against
the side of the blade to bring it to a halt.
Always cut at a steady rate of progress. This will
prevent accidents and prolong the life of your saw
and the blade.
Use only a damp cloth to clean your saw. Do not
use any aggressive agents for cleaning purposes.
Check your saw to ensure that it is in good wor
king order. If the saw fails to work properly, have
it checked. Leave all maintenance and inspection
work strictly to a qualified electrician or ISC
GmbH.
Check the fastening screws
Check the fastening screws regularly and make
sure that they are all securely tightened. Tighten
any loose screws immediately, otherwise there is
the risk of serious injuries.
Save this instructions.
05.08.2008 8:48 Uhr Seite 7
GB
7