GB
F
D
OPERATION
ADJUSTING THE DEPTH STOP ROD (FOR CHI-
1442/CHI-1802M ONLY) (Fig.11)
The depth stop rod helps control the depth of drilled
holes.
Lock the switch trigger by placing the direction of
■
rotation selector in the center position.
Loosen the auxiliary handle assembly by turning the
■
knob counterclockwise.
Adjust the depth stop rod so that the drill bit extends
■
beyond the end of the rod to the required drilling
depth.
Tighten the auxiliary handle assembly by turning the
■
knob clockwise.
MAINTENANCE
WARNING
When servicing, use only identical Ryobi
replacement parts. Use of any other parts may
create a hazard or cause product damage.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING
Do not at any time let brake fluids, gasoline,
petroleumbased products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may
result in serious personal injury.
Do not abuse power tools. Abusive practices can damage
tool as well as workpiece.
WARNING
Do not attempt to modify this tool or create
accessories not recommended for use with this
tool. Any such alteration or modification is misuse
and could result in a hazardous condition leading
to possible serious personal injury.
E
I
P
NL
S
DK
N
FIN
GR
English
ENVIRONMENTAL PROTECTION
13
H
CZ
RUS
RO
Recycle raw materials instead of disposing as
waste.
The machine, accessories and packaging
should be sorted for environmental-friendly
recycling.
PL
SLO
HR
TR