Descargar Imprimir esta página

Cooper Lighting PHL300 Manual De Instrucciones página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

PHL300 325-1576.qxd
C
ongratulations! You have purchased a Cooper Lighting 300 watt halogen
painter's worklight. This light has been designed for painting, wallpapering or for
any project, indoors or outdoors, where true color rendition is desired. This light
also eliminates unwanted shadows or glares, making painting and wallpapering
easier while providing professional results.
What you need
• Screwdriver
• 3 Wire grounded extension cord
What's included
• Fully assembled unit (A)
• (2) 300 watt quartz halogen bulbs (B)
What to know
INSTRUCTIONS PERTAINING TO A RISK OF
FIRE, ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE
UV RADIATION OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS.
READ ALL INSTRUCTIONS.
Warning: To reduce the risk of FIRE, ELECTRIC SHOCK,
EXPOSURE TO EXCESSIVE UV RADIATION OR INJURY TO
PERSONS:
• Unplug and allow to cool before replacing bulb.
• Lighted lamp is HOT!
• Do not remain in light if skin feels warm.
• For indoor and outdoor use.
• cULus Listed for wet location use.
• Fixture must be connected to a 120 Volt, 60 Hz power source.
Any other connection voids warranty.
• Keep away from flammable objects.
• The bulb and fixture get extremely hot during use. Always unplug the light
and let it cool 5 minutes before attempting to touch the fixture.
• Do not touch hot lens, guard, or enclosure.
• Bulb gets HOT quickly! Only contact switch/plug when turning on.
• The electrical system, and the method of electrically connecting the fixture
to it, must be in accordance with the National Electrical Code and local
building codes.
• Do not operate the unit with a missing or damaged wire safety guard, safety
glass lens (lamp containment), or UV filter.
Call for customer service and/or missing or damaged parts (800-334-6871)
8/22/06
4:13 PM
Page 2
2
PHL300
B
A

Publicidad

loading