GYS Energy 124 Manual De Instrucciones página 9

Translation of the original instructions
• After the charging process, disconnect the
battery charger from the power supply
network and remove the connector from the
car frame and then the connector from the
battery, in this order.
Connection:
• Class II device.
• This machine is fuse-protected.
Maintenance:
• If the power supply cable is damaged, it must
be replaced by the manufacturer, its service
agent or an equally qualified person.
• Service should be performed by a qualified
person.
• Warning! Always remove the power plug
from the wall socket before carrying out any
work on the device.
• If the internal fuse is blown, it must be replaced
by the manufacturer, its after-sales service or
an equally qualified person.
• Regularly take off the cover and remove
dust with an air gun. Take the opportunity to
have a qualified person check the electrical
connections with an insulated tool.
• Under no circumstances should solvents or
other aggressive cleaning agents be used.
• Clean the device's surfaces with a soft, dry
cloth.
Réglementation :
• The device complies with European Directive.
• The certificate of compliance is available on
our website.
ENERGY 124 / 126
EN
9