Product Description And Specifica- Tions - Casals CAG20/180S Manual De Instrucciones

hands are free to control the tool.
- Before using the appliance check the working
speed shown in the disc/ tool is equal or greater
than the appliance's speed.
- Before using the appliance check the disc / tool
dimensions are compatible for this appliance.
- Before using the appliance ensure that the disc /
tool is properly fixed in place.
- Do not touch any of the appliance's moving
parts while it is operating.
- Do not grind any material containing asbestos.
Working with asbestos and/or silica wheel, the
dust produced is harmful for health. Prevent
inhalation of these types of dust by following the
appropriate health and safety regulations.
- Exercise precaution after employing the stop op-
eration on the appliance as the tool will continue
moving from the effect of its own mechanical
inertia.
- Fully unroll the appliance's power cable before
each use.
- Check the position of power cables before com-
mencing work ensuring they are well away from
the work area.
- Keep hands and other body parts well away
from the work area whist the tool is in use.
- Do not use the appliance if the parts or accesso-
ries are not properly fitted.
- Do not use the appliance if the accessories
or consumables attached to it are defective.
Replace them immediately.
- Use the appliance handle/s, to catch it or move
it.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- Unplug the appliance from the mains before
replacing any accessory.
- Unplug the appliance from the mains when not
in use and before undertaking any cleaning
task.
- This appliance is for professional use.
- This appliance is intended for adult use. Ensure
that this product is not used by the disabled,
children or people unused to its handling.
- This appliance is not a toy. Children should be
supervised to ensure that they do not play with
the appliance.
- Take special care about discs and tools, they
may be stored fixed on the appliance and used
according to the manufacturer's instructions.
- Do not use separator or reducing bushings,
adapters to fix the discs / tools they are not
directly compatible with the appliance.
- Do not use cutting discs on deburring opera-
tions.
- Do not expose to extreme temperatures or
strong magnetism.
- Keep the appliance in a dry, dust-free place, out
of direct sunlight.
- Never leave the appliance unattended while in
use.
- Never leave the appliance connected and unat-
tended if is not in use. This saves energy and
prolongs the life of the appliance.
- Never rest the appliance into a surface while in
use.
- Do not use the appliance on any part of the
body of a person or animal.
- Let the appliance running with no load for 30
seconds in a safe position. If you notice serious
vibration or other defects stop the appliance
immediately. Then check the problem and /
or proceed as we describe on Anomalies and
Repair clause.
- When using the angle grinder make sure that
the workpiece is securely clamped to a work
bench or vice.
- Before cutting ensure there is a suitable gap
below the workpiece to prevent the disc from
touching any obstacles.
- Not recommended for use in conjunction with a
cut-off stand.
- Do not touch the grinding disc after operation.
The bit will be HOT and will burn!
PRODUCT DESCRIPTION AND SPECIFICA-
TIONS
DESCRIPTION
(FIG. 1, 2, 3, 4, 5)
A Lock lever
B Switch Trigger
C Spindle blocking button
D Auxiliary handle
E Collard of guard
F Bolt
G Tightening key
H Clamping nut
I Support plate
J Spindle
K Spinning Button
L Disc (not included)
M Protective guard
N Carbon brush cover