GYS POWERDUCTION 160LG Manual De Instrucciones página 15

Translation of the original instructions
GENERAL INSTRUCTIONS
This manual contains safety and operating instructions, to be fol-
lowed for your safety. Please read it carefully before using the
device for the first time and keep it in a safe place for future refe-
rence. Read and understand the following safety recommenda-
tions before using or servicing the unit. Any change or servicing
that is not specified in the instruction manual must not be under-
taken. The manufacturer is not liable for any injury or damage
caused due to non-compliance with the instructions featured in
this manual . If there is any issue or uncertainty, please consult a
qualified individual to operate the equipment correctly. This ma-
chine should only be used for operations comprised within the li-
mits indicated on the machine and in the instruction manual. The
operator must observe the safety precautions. In case of ineda-
quate or unsafe use, the manufacturer cannot be held liable for
damage or injury. Any other uses not specified in this manual is
forbidden, and possibly dangerous. The product is semi automa-
tic and requires the presence of an operator.
This unit can be used by children aged 8 or over and by people
with reduced physical, sensory or mental capabilities or lack of
experience or knowledge, if they are properly monitored or if ins-
tructions for using the equipment safely have been read and risks
made aware of. Children must not play with the product. Clea-
ning and maintenance should not be performed by an unsuper-
vised child.
Do not use the charger if the mains cable or plug is damaged.
Do not cover the device.
Fire and explosion risks!
• Do not use the device in an explosive atmosphere.
• Keep airbags, gas cannisters or other pressurised gas contai-
ners away from the induction heating machine.
Warning, heat and flame risk.
• Do not overheat parts and adhesives.
• Be wary of fire, keep a fire extinguisher is in the vicinity..
• Do not position the machine on, or near flammable surfaces.
• Do not position the machine near flammable materials.
Warning ! Very hot surface. Risk of burns.
• The parts and pieces that have just been heated are hot and
may cause burns when manipulated.
• Do not touch any hot parts with your hands.
• Wait for the parts and pieces to cool down before handling
them.
POWERDUCTION 160LG EN
15