GYS POWERDUCTION 160LG Manual De Instrucciones página 16

Translation of the original instructions
16
POWERDUCTION 160LG
• Check that jewellery (such as wedding rings) or other metal
pieces do not get close to the induction heating machine or
the inductor when switched on.
• Remove any jewellery or any metal object from yourself be-
fore using this machine
• People with metal implants should not use this machine.
• In case of burns, rinse with water abundantly and see a medi-
cal doctor as soon as possible.
Dangerosity of the gas fumes
• Keep the head away from the fumes, do not inhale.
• If working inside, ventilate the area or use a fume extractor to
evacuate the gases and fumes.
• Induction heating of certain materials such as adhesives and
flux can generate fumes and gases. Breathing these fumes and
gases can be dangerous for your health. For example, heating
urethane generates a gas : hydrogen cyanide, potentially mor-
tal for hu-mans.
• If the ventilation is insufficent, use an approved respiratory unit.
• Read the safety data sheets (MSDS) and the manufacturer's
ins-tructions for adhesvies, flux, metals, consumables, coatings,
clea-ning agents, corrosives, and paint strippers.
• Do not use the heater on parts being degreased or sprayed.
The heat might react with fumes and generate highly toxic
gases.
• Work in a confined area only if it's well ventilated, or use an
ap-proved repiratory/filtration unit. Make sure that a qualified
per-son is around to watch over you. The fumes and gases re-
leased while heating can replace oxygen or air, causing acci-
dents or death. Check the quality of the air you're breathing
• Do not overheat metals, such as galvanised steel, covered with
lead or cadmium, unless the coating is removed from the sur-
face before it's heated, that the area is well ventilated, and if
needed, use an approved filtration/respiratory unit.. Foundry
pieces and all metals containing such elements may generates
toxic fumes if overheated.
• Check the MSDS for temperature related details.
Warning, electrical danger
Caution: Danger of optical radiation when the heated metal ele-
ments reach fusion.
EN