Parts Of The Device; Commissioning; Temperature Monitoring; Setting Up - Festool SYSLITE STL 450 Manual De Instrucciones

Ocultar thumbs Ver también para SYSLITE STL 450:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
English
5

Parts of the device

The specified illustrations appear at the
beginning of the Operating Instructions.
[1-1]
On/off switch
[1-2]
Luminous surface
[1-3]
Power cable
[1-4]
Cable holder
6

Commissioning

WARNING
Unauthorised voltage or frequency.
Risk of accidents
► Observe the specifications on the
machine's name plate.
► Observe country-specific regula­
tions.
WARNING
Electric shock caused by penetrat­
ing moisture.
Physical injury and damage to the
mains plug.
► Do not insert the mains plug in the
socket if the surroundings are
damp.
6.1
Switching on/off [1-1]
Switching on
► Unwind the power cable from the
cable holder[1-4].
► Insert the mains plug.
► Press the on/off switch[1-1].
Switching off
► Press the on/off switch [1-1] again.
► Pull out the mains plug.
► Wind the power cable onto the cable
holder[1-4].
14
6.2

Temperature monitoring

When the permissible operating tem­
perature range is not reached/is excee­
ded, the grazing light switches itself off.
7

Setting up

The grazing light has a range of 2.50 m.
When this range is exceeded, uneven
surfaces may not be reliably detected.
To ensure the surface is perfectly illu­
minated, position the grazing light at a
90° angle to the surface [2].
The grazing light can illuminate various
target surfaces:
[3 A]
Floor -> section
[3 B]+[3 C] Wall -> section
section
[3 D]
Ceiling -> section
[3 E]
Inclined surfaces -> sec­
tion
7.1
Setting device up for use at
floor level
The grazing light can be set up in two
different positions; [3 A] + [3 B].
7.2
Setting device up for use above
floor level
Only use the device together with the
Festool ST DUO 200 tripod and the
Festool AD-ST DUO 200 adapter (some
items not included). Follow the operat­
ing instructions for the tripod and the
adapter.
Place the tripod on a dry, level and sta­
ble surface. Fold out the tripod legs to
the limit stop.
Connecting the tripod and adapter [4]
► Fold out the tripod to the limit stop.
7.1
7.1
and
7.2
7.2
7.2

Publicidad

Tabla de contenido
loading

Tabla de contenido