Technical Information; Installation Considerations - Hansgrohe AXOR Citterio 39115 1 Serie Instrucciones De Montaje

Ocultar thumbs Ver también para AXOR Citterio 39115 1 Serie:
Tabla de contenido

Publicidad

A11.18.1-005
CSA B15.1-005
ICC/ANSI A117.1
Tools Required / Outiles Utiles /
Herramientas Útiles
8 mm

17 mm
30 mm
27 mm
English

Technical Information

Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

Installation Considerations

For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
This faucet requires rough 136181 (not
included). The rough must be installed and the
finished wall completed and made watertight
before installation of the trim kit.
This trim is not compatible with
old-style rough 38111181.
If rough 38111181 is already installed,
please contact Hansgrohe Technical Ser-
vice regarding the additional parts and
special instructions necessary to install
this trim kit.
Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 PSI
145 PSI
10° - 140° F*
176°F*
1.5 GPM

Publicidad

Tabla de contenido
loading

Tabla de contenido