Tractel Group caRol Manual De Empleo Y Mantenimiento página 7

WLL (kg)
Ø (mm)
300
500
(1): at last winding layer and maximum length of crank (Emax)
(2): at last winding layer
WLL: Working Load Limit.
The carol TM winch is designed for use within the following operating temperature range: –10°C to + 50°C.
4.1.2 caRol™ wire ropes
The specifications of the carolTM wire rope are given in the table below:
Nominal diameter of wire rope with no load
Weight of 10 m equipped wire rope
Weight of wire rope per additional meter
Tensile strength of wire rope
4.2 carol TM type TS manual winch
4.2.1 Winch
Fig. 2
1 Structure
2 Carrying handle
3 Drum
4 Crank handle
5 Crank length adjustment knob
Wire rope
Maximum
capacity (m)
4.3 40
6.8 20
Winch
Material
Composition
Maximum length
1 2
10
9
Force
on crank
Number
(kg) (1)
of layers
7 18
5 24
TR300
Ø 4,3 mm
Zinc-plated steel Zinc-plated steel
18 x 7
1350 g
83 g/m
12 kN
40 m
3 4
5
6
7
8
6 Access cover for wire rope clamp screws
7 Control crank with adjustable length
8 Access cover for drum clutch-release lever
9 Drive hub
10 Protective casing
7
Lifting Weight
distance per of winch
crank turn without wire
(mm) (2) rope (kg)
70 16.5
50 18.5
TR500
Ø 6,8 mm
18 x 7
2350 g
185 g/m
36,3 kN
20 m
GB