handset
and
automatically revert to PULSE dialing.
FLASH key
(special features)
The FLASH key
number of special features (follow-me, call
waiting, conference, etc.) provided your
telephone is connected to a digital Central
Office or to a PBX system.
Setting the ringer volume and melody
This telephone offers three melodies and
three ringer volumes.
Procedure:
Lift the handset
Press the MUTE key
Press the
Press one of the keys (
:
depending on the ringer volume or
melody you want to use
Press the MUTE key
Replace the handset
: melody 1 – low volume
key
key : melody 1 – medium volume
: melody 1 – high volume
key
key
: melody 2 – low volume
key : melody 2 – medium volume
key
: melody 2 – high volume
: melody 3 – low volume
key
key : melody 3 – medium volume
key
: melody 3 – high volume
key : turns off the ringer until the
handset is lifted again. Then the
ringer reverts to the most recent
setting.
The new setting will be used for the next
incoming call.
the
telephone
allows you to use a
key
to
will
REDIAL key
In order to redial the last number dialed,
press the REDIAL key
dialed contains more than 31 digits, the
REDIAL function will not work properly.
MUTE key
When you press the MUTE key
call, the microphone is switched off and the
other party cannot hear you. However, you
will still be able to hear the other party. To
resume a normal conversation, press the
MUTE key
PAUSE key
This key can be used when the telephone
is connected to a PBX system. It inserts an
)
interdigit
seconds, starting with the first digit when
you press the PAUSE key
pauses
memories, two-touch memories or on the
REDIAL key
Storing phone numbers in memories
The telephone has 14 memories: 10 two-
touch memories, accessed by the MEM key
and four one-touch memories (position 2
on page 1). Each of these memories can
store up to 21 digits.
Storing phone numbers in one-touch
memories:
Lift the handset
Press the MUTE key
Press one of the four one-touch
3
. If the last number
again.
pause
of
approximately
can
be
stored
.
during a
3.6
. These
in
one-touch