Set Defaults - Symbol QRG LS 2208 Manual De Instrucciones

Q u i c k
Programming Bar Codes
Following are some frequently used programming bar
codes.
Note: For additional host types, refer to the LS 2208
Product Reference Guide, p/n 72-58808-xx,
available on the LS 2208 CD, or on the Sym-
bol Web site,
http://www.symbol.com/manuals.

Set Defaults

Scanning this bar code sets all parameters to their
default values
Host Type
If you are using a Synapse cable (i.e., part number
STIxx-xxxx), the scanner autodetects the Synapse
cable you are using, so you do not need to scan bar
codes to enable the synapse host.
R e f e r e n c e
.
SET DEFAULTS
65