Programming Bar Codes
Following are some frequently used
programming bar codes.
Note:
Set Defaults
Scanning this bar code sets all parameters to
their default values.
Host Type
If you are using a Synapse cable (i.e., part
number STIxx-xxxx), the scanner autodetects
the type of host you are using, so you do not
need to scan bar codes.
If you are using a USB interface, the scanner
autodetects the USB and defaults to the HID
keyboard interface. See
IBM Hand-Held host type. Refer to theLS1900
Series Product Reference Guide, p/n 72-
53903-xx, for additional USB host types.
If you are using Keyboard Wedge, RS-232,
Wand Emulation, or IBM 46XX, you must select
that host type from the following bar codes:
Keyboard Wedge Host Type
IBM PC/AT and IBM PC COMAPATIBLES
L S 1 9 0 0
S e r i e s
For additional host types, refer
to the LS1900 Series Product
Reference Guide,
p/n 72-53903-xx, available on
the LS1900 Series CD.
SET DEFAULTS
page 47
42
to select the