Volvo 31454865 Manual Del Usuario página 20

Bicycle holder, towbar mounted
en-GB
Preparations
18
1 Install the bracket for the support bar.
2 Check that the screw is correctly
seated.
3 Tighten the nut.
1 Unscrew the knob to prepare the
installation of the frame holder on the
support bar.
2 Tighten the frame holder to slacken
off the mounting. Pressing the clamp
together tightly can help.
3 Clamp the mounting around the support
bar, and release the spring.
Note!
The spring in the frame holder has
high sprung resistance, so mind your
fingers.