Style selections 47895 Instrucciones De Montaje página 4

ASSEMBLY INSTRUCTIONS
1. Determine the desired location for the mirror (A).
Mark the location of the mounting screws (AA)
on the wall, ensuring they are level. It is
recommended the mirror (A) be installed to
at least 1 wall stud. In order to locate wall studs,
you can use a stud finder (not included) or tap
along the wall until you find a spot that sounds
solid. If you are unable to locate a wall stud, it is
recommended you use wall anchors (not
included) to secure the mirror (A).
2. If using wall anchors: Using a drill (not included),
create a hole in the wall for each wall anchor
over the marked locations. Insert 2 wall anchors.
Insert (1) 2 in. screw (AA) into each wall anchor.
If installing directly into wall studs: Using a drill
(not included), insert (1) 2 in. screw (AA) into
each marked location.
Hardware Used
AA
2 in. screw
3. Hang the mirror (A) on the screws (AA) using
the mounting hardware preassembled to the
mirror (A).
1
2
x 2
3
4
A
AA
AA
A