Programming Track Numbers - Philips AZ 2010/00 Manual De Instrucciones

CD MODE: SHUFFLE & REPEAT
The CD MODE button allows you to select 4 different play
modes. The modes can be selected or changed during playback.
SHUFFLE - All tracks are played in random order.
SHUFFLE REPEAT ALL - Repeats the entire CD or programme
in random order.
REPEAT - Plays the current track continuously.
REPEAT ALL - Repeats the entire CD or programme
1. During playback or in the STOP position, select your play
mode by pressing CD MODE once or more until the desired
play mode appears in the display.
– You can use SEARCH ∞ or § to skip tracks during CD
MODE playback.
2. To return to normal playback press CD MODE until the various
SHUFFLE/ REPEAT modes are no longer shown in the display.
– You can also press STOP 9 to quit the play mode.

PROGRAMMING TRACK NUMBERS

You may store up to 20 tracks in the desired sequence. If you
like, store any track more than once.
1. In the STOP position, press SEARCH ∞ or § for your
desired track.
2. As soon as your chosen track number is displayed, press
PROG once to store the track.
– The display will show '
followed by your selected track number.
3. Repeat steps 1. and 2. to select and store all your desired
tracks.
To review your set programme
1. In the stop position, press and hold down PROG for one
second or more.
– The display will show in sequence all your desired tracks.
2. Start playback of your programme by pressing PLAY•PAUSE
2;.
Erasing a programme
You can erase the contents of the memory by:
– pressing the CD door open;
– moving the source selector position;
– pressing STOP 9 twice during playback / in stop position.
• The display will show '
is cancelled.
' briefly and ' ',
PROGRAM
' briefly before the programme
AZ 2010 /00
page
CD PLAYER
CD
PROGRAM
9
9