Other Functions - TEFAL ULTRABLEND COOK Manual Del Usuario

OTHER FUNCTIONS

Start/Stop : allows to stop any blending or heating program before the end by
•
pressing this button.
You can also stop the blending during the cycle :
- within 1 minute of working, press the start/stop button
- more than 1 minute of working, press and hold the start/stop button for 3 seconds
Overload protection
• The appliance is equipped with overload protection. This prevents the motor from being
damaged by overloading.
If the appliance switches off during operation, proceed as follows :
- Switch the appliance off using the power button, unplug and leave it to cool down for
approximately 15-20 minutes.
- Reconnect the appliance to the power supply and resume blending.
CLEANING
• Clean the jug immediately after use.
• For easy cleaning, you can use the Pulse/Clean button :
- Put 150ml of water and 1 drop of washing up liquid in the jug. Press the
Pulse/Clean button.
An excess of washing up liquid creates more foam and consequently can lead to
overflowing. Finish cleaning the jug with the aid of a sponge.
• Rinse the inside of the jug and the lid under running water.
• In the event of the heated part of the jug getting extremely dirty, fill in the jar with
a mix of water and washing up liquid and let it soaked for a few hours to help get it
clean.
• Use a damp cloth to clean the motor unit (E). Dry it carefully.
• The detachable parts (lid, lid cap, carrier seal, seal, measuring cap) can be cleaned
with a sponge and hot soapy water. You can also use the brush to clean the inside
of the jug.
Caution:
• Empty the preparation, the jug is not meant for storing food in the refrigerator
or freezer.
• To clean the outside of the motor unit and the walls of the jug, use a damp cloth.
• Do not immerse the appliance in water (neither the motor unit nor the jug base).
Never put the motor unit (E) under running water.
• The jug, lid cap and removable silicone gasket must not go in the dishwasher.
8