TEFAL ULTRABLEND COOK Manual Del Usuario página 9

WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK ?
Problems
Appliance does not work
The appliance stopped
while in use
Excessive vibrations
Leak or overflow from the
lid
Leak from the bottom of
the blender jug
The blades do not turn
easily
Causes
The plug is not connected.
The blender jug is not positioned
correctly on the motor unit or the
jug and lid are correctly in place
and are not locked onto the
motor unit.
Appliance, keypboard or program
not responding
In case of overheating
Overload or overheating
The product is not placed on a
flat surface.
Volume of ingredients is too high. Reduce the quantity of
The silicon gasket (D) is missing
or not correctly positioned.
Volume of ingredients is too high. Reduce the quantity of
The lid is not correctly positioned. Place the lid correctly on the
Deterioration of the
watertightness of the appliance.
Pieces of food too large or too
hard.
The blended liquid is too hot and
distorted the silicon gasket.
Solutions
Connect the appliance to a
socket with the same voltage as
indicated on the rating plate of
the appliance.
Check that the blender jug and
the lid are positioned properly on
the motor unit as explained in
the instructions.
Unplug the appliance, wait for 1
minute and plug in again.
Switch the appliance off using
the power button, unplug and
leave it to cool down for
approx.15-20 minutes.
- Switch the appliance off using
the power button, unplug and
leave it to cool down for
approx.15-20 minutes.
- Reconnect the appliance to the
power supply and resume
blending.
Place the appliance on a flat
surface.
ingredients processed.
Place the silicone gasket correctly
on the motor unit.
ingredients processed.
blender jug.
Caution : the blades are not
removable.
Contact the consumer service, see
contact information in the
warranty leaflet.
Reduce the size or quantity of
ingredients processed.
Contact the consumer service, see
contact information in the
warranty leaflet.
EN
9