Operation Of The Device - YATO YT-7292 Manual De Instrucciones

GB
Always use personal protection means appropriate to the work being executed, such as protective glasses or goggles, gloves,
hearing and head protection, protective clothes and shoes.
Do not strive to reach anything, always maintain balance. A loss of balance may lead to an electric shock, fi re or injuries.
The device must be kept away from any liquids. The device is not hermetic and any contact with liquids may imply damage to the
tool and lead to an electric shock or injuries.
Do not use the device for the purposes related to investigation of human or animal organisms. The product has not been designed
for any medical applications.
The product is not shock-resistant. Do not place the device on unstable tables or other unstable surfaces, from which it might
fall. Do not drop anything on the device. Mechanical damage caused by failure to observe the safety recommendations are not
covered by the guarantee and may increase the risk of injuries.
The device should be stored in the unit package it is supplied in. The device should be stored in a dry, well ventilated place, away
from reach of children.

OPERATION OF THE DEVICE

The videoscope screen
The videoscope screen may function in several modes. It may be installed on the device or function in the remote radio com-
munication mode.
Attention! All connections of the screen must be carried out while the screen and the device to which the screen is being con-
nected are off. The manufacturer will not be held responsible for any damage or losses being a consequence of a breach of the
recommendations indicated in the manual.
Assembly and disassembly of the videoscope screen
Place the screen on the guide bars of the videoscope and move it to the left until the lock snaps shut. Make sure that during opera-
tion the screen does not slip out of the guide bars.
In order to disassemble the screen, press the latch of the lock placed underneath the screen, and then pull it out from the guide
bars.
Connection of the camera
Before you connect the camera to the videoscope, make sure the seal at the end of the conductor of the camera is not worn out
or damaged. While connecting the camera, make sure the protrusion at the end of the conductor fi ts the incision in the device
housing.
Turn the nut tight in the direction opposite to the arrow.
The camera with the conductor may be disconnected from the device. In order to do so, undo the fastening nut in the direction
indicated by the arrow, until the camera is disconnected.
Remote operation
During the remote operation of the screen, it must not be connected to the videoscope. You may use a stand to place the screen
comfortably.
Turn the videoscope and the screen on, using the switches. Both the devices should be found automatically. The screen will
display cyclically alternating symbols from CH1 to CH4. In case there is no picture or the picture is noisy, press the button,
of the videoscope and wait until a correct picture from the videoscope camera appears. The operation must be repeated for all
the channels. Since the screen communicates with the videoscope through radio waves, in case of operation in an environment
with strong electromagnetic interference, it may not be possible to obtain a picture or a picture without interference during remote
operation. In such cases the screen should be installed in the videoscope.
Connection of the screen to a TV set (exclusively in the model equipped with a memory cards slot)
Using a video cable it is possible to connect the screen to a TV set and see the picture from the camera on the TV screen.
Attention! While connecting the videoscope screen to a TV set, follow the recommendations and instructions provided by the
manufacturer of the TV set.
In order to connect the screen to a TV set, it is necessary to connect one plug of the video cable to the socket of the screen
marked as „Video out", and the other to the TV set. Turn on the screen and the TV set; the picture will disappear from the screen,
appearing on the screen of the TV set.
Attention! Depending on the model of the TV set, it may be necessary to select an appropriate video output. Also remember to
set the adequate mode of the screen.
Memory cards (exclusively in the model equipped with a memory cards slot)
The memory card slot supports „Micro SD" cards. Insert the memory card into the slot, until it clicks.
In order to remove the memory card from the slot, press it carefully with a fi nger, and when it partially comes out of the slot,
remove it.
O R I G I N A L I N S T R U C T I O N S
12