YATO YT-7292 Manual De Instrucciones página 14

GB
Picture preview mode
The functions of the buttons below the screen in the picture preview mode are explained above.
Zoom in
When the button is pressed, the picture displayed in the screen is zoomed in. The following zoom in grades are available – for
the model YT-7292: 1,2; 1,4; 1,6; 1,7; 1,8; 1,9; 2,0 and for the model YT-7293: 1,5; 2,0; 2,5; 3,0; 3,5; 4,0. Since zooming in of the
picture is realised due to the interpolation of the picture of a standard size, the quality of the amplifi ed picture may be impaired. In
case of operation in the remote mode, it may happen that due to interference in the wireless transmission the picture will return
to the basic size.
Menu of the screen (exclusively in the model equipped with a memory cards slot)
When the button is pressed, the menu is displayed in the screen. The menu has three overlaps, which are changed by
means of the extreme buttons.
EXIT – permits to leave the menu or the currently displayed menu screen.
Overlap: Advanced Setting
Photo Quality – permits to adjust the quality of the photographs saved during recording of the current preview from the camera.
High Quality – high quality; Standard Quality – standard quality; Low Quality – low quality
Tuner Channel – permits to select the communication channel between the videoscope and the screen in the remote operation
mode. CH1; CH2; CH3; CH4 – selection of channel 1, 2, 3 or 4
Movie Quality – permits to select the quality of a video fi le. QVGA – 360 x 240 pixels; D1 – 720 x 480 pixels.
TV Output Standard – permits to select the standard of the picture, when the screen is connected to a TV set. PAL – PAL standard
transmission, NTSC – NTSC standard transmission.
Language – permits to select one of the following languages of the screen menu: English, French, Spanish, Portuguese and
Chinese.
Overlap: Auto Capture
Auto Capture - On – permits to automatically and cyclically record a picture or a video sequence. Off – automatic recording is off
Master Capture – permits to select the automatic recording option. Photo 1 – approximately every 10 sec. a picture of the current
view from the camera is saved. Photo 3 – approximately every 10 sec. a sequence of three photographs of the current view from
the camera is saved.
Video 5s – approximately every 10 sec. a fi ve-second video sequence is saved. Video 10s – approximately every 10 sec. a ten-
second video sequence is saved.
File OverWrite Setting - On – in case the memory card is full, the older fi les will be automatically overwritten by new fi les. Off – in
case the memory card is full, no further fi les will be saved.
Saving of pictures is signalled in the screen by a photo camera icon, and saving of video sequences by a movie camera icon.
Overlap: Set Time/Date
Set Time/Date – permits to set the current date and time
Photo TimeStamp - On – during saving of a photograph, the date and time it was taken at is automatically added to it. Off –informa-
tion of the date and time the photograph was taken at is not included in the photograph.
Movie TimeStamp - On – during saving of a video sequence information of the date and time the recording started at is added to
the fi le. Off – the video sequence does not include the information of the date and time the recording started at.
Load Default - Yes – return to the factory settings of the menu.
Playing of the saved fi les (exclusively in the model equipped with a memory card)
It is possible to view the saved pictures and video sequences in the screen. During work press the power button, and the screen
will go to the viewer mode. If after the power button is pressed „No File" is displayed in the screen, then there are no fi les saved
in the memory card. Press the button, after which six miniatures will be displayed, and when the button is pressed anew, the
catalogues in the memory card will be displayed.
Pressing the button will cause the marked photograph to be displayed or entry to the catalogue. Pressing the or
buttons will cause the previous or the next photograph to be displayed (video sequence).
In case of a video sequence (marked with a movie camera icon in the right upper corner), pressing of the button will cause its
opening, while pressing the button will cause the playing to stop.
Pressing the power button again will imply going t the preview of the picture from the camera of the videoscope.
Playing menu (exclusively in the model equipped with a memory cards slot)
If the screen is in the playing mode, pressing the button will cause options available in this mode to be displayed.
Playback Menu – permits to delete the fi les saved in the memory card and to format the memory card.
File Delete – permits to delete the fi les saved in the memory card. Attention! The deleted fi les are irrecoverably eliminated from the
memory card and it is not possible to recover them afterwards. It is recommended to use this option with adequate care.
O R I G I N A L I N S T R U C T I O N S
14