Operation - Trotec BT10 Manual De Instrucciones

may be changed or modified! The safety instruc-
tions are to be observed!
03. Appliance illustration
1. LCD display 4. LED torch
2. Function button 5. Screw of the battery compartment lid
3. Measuring tip 6. Battery compartment lid
PSI
BAR
Kpa
2 x AAA 1.5 V batteries
G
B Y 1 0
TIRE PRESSURE GAUGE
PLEASE READ MANUAL
FOR SAFETY!
RoHS
Operating Manual – Tyre Pressure Measuring Instrument BY 10

04. Operation

Press the function button 2 first to switch on the app-
liance. The display initially shows you the last used unit
of measurement. You can switch between the units (PSI-
BAR-Kpa) by pressing the function button 2 again.
Now press the measuring tip 3 onto the valve of your
tyre. The display shows the tyre pressure in the previ-
ously selected unit of measurement.
The appliance switches off automatically if not used for
45 seconds. If you wish to switch it off manually, press
and hold the function button for 2.5 seconds until the
appliance switches off.
I
The tyres should be cold when measuring! Warm
tyres can distort the measurement result.
B - 3