Long Term Storage - Safety 1st 09100 Manual Del Usuario

Fold Down Bed Rail
WARNING:
• Use handle when releasing buttons.
CAUTION:
• Ensure that fingers are kept clear of hinged
parts when folding bed rail.
• Keep children away from bed when folding
bed rail up or down.
8
Fold Down Bed Rail
or for periods of non-use):
Push forward slightly on bed rail and press
two upper release buttons (Figure 8).
Press two lower release buttons and pull
up handle (Figure 8a) to expose elbow
hinges.
Fold the frame away from the bed and
down toward the floor (Figure 8b).
To reinstall bed rail: repeat steps 5 to 7
from Installing Your Bed Rail.

Long Term Storage

9
Disassemble for Long Term
Periods of Non-use:
Place bed rail in fold down position.
Press pin on each support foot and
remove support rod (Figure 9).
Press pin on support rod and slide
support rod inside itself (Figure 9a).
Locate small hole on side of panel (Figure
9b). Using two screwdrivers, press both
tabs inside holes at once and pull bed rail
panel from side panel. Repeat on other
side. Panel can now be removed.
Locate two pins underneath fabric. Press
both pins and collapse bed rail panel
(Figure 9c).
Fold side panels forward (Figure 9d).
NOTE: If you saved the box that the bed
rail came in, the parts can now fit into
the box.
8
(to change bedding
8b
Fold Down Position
9
Press Pin
9b
Press Tabs
PAGE 4
8a
Upper
Release
Button
9a
Press Pin
9c
9d
Lower
Release
Button
Press Pins
Press
Button