Chapter 4. Error Handling; Printer Status Lamps Are Displayed In Red - HiTi Digital P910L Manual Del Usuario

Chapter 4. Error Handling

Printer Status lamps are displayed in red

When the error happens, the details of the error can be confirmed with
the printer status lamps.
Printer Status Lamps and Paper Setting Lamp display ●:on、○:off、
＊:flashing
／ : Indicates that irrespective lit
LED Display
MEDIA ERROR
＊
○
○ ●
○ ●
＊
●
● ●
● ●
PAPER
SET
／
The drawer unit is
opened.
＊
Paper jam occurred.
Trouble of printer
／
control board. The
printer mechanical
section is faulty.
／
The ink ribbon set is not
supported.
Paper is not set.
○
Out of paper.
The ink ribbon is not
●
loaded.
Ribbon Empty.
17
Status
Close the drawer unit.
Remove the paper. If
paper jam occurs
frequently, consult
with the service
center.
If it occurs frequently,
consult with the
service center.
Ink ribbon or printer
abnormality is
assumed. Consult with
the Service
Department.
Set paper.
Replace paper.
Set the ink ribbon.
Replace the ink
ribbon.
Corrective Action