Control Panel - Sharp SJ-WX830A Manual De Manejo

Control panel

Icons
Express Freezing
• When there is a power failure during the operation of
express freezing or ice tray cleaning, the operation is
stopped.
• See "Multi temperature room" about the assisting mode.
• The other settings are the same as before the power
failure.
Press to select ON/OFF of each mode or temperature setting.
To light up the control panel
Press the enter key.
The control panel shows the preset temperature of each
compartment and the operating icons.
by a default setting.)
* The temperature is not indicated on the display while
one of assisting modes in operation.
Temperature display changes variously.
Note
• Press the keys with your bare hand to operate.
Operation with wet hand is invalid.
• Operation is not accepted while the door* is opened.
• When there is no operation for 1 minute, the display
automatically returns to the standby display. Thus if
there is no operation for another 1 minute the display
• Every time you open the door*, the control panel lights
up to show the current setting.
Temperature rise sign
Will indicate the rise of inside temperature
caused by power failure or some other
malfunction.
For indicating preset temperature or
ON/OFF of each mode.
For entering the setting.
*
< Standby display >
EN-6