Bürkle 5603-3000 Instrucciones Para El Uso página 4

English
General safety requirements
` ` Read these directions for use carefully before using.
` ` Keep these directions for use where they will be
accessible for all users.
` ` Failure to comply with the directions for use shall
render all warranty conditions null and void and
may lead to personal injury and material damage.
` ` The instrument must only be used by qualified
skilled employees.
Safety instructions before using
` ` Follow the manufacturer's instructions and safety
instructions of the medium you are filling.
` ` Damage to the respiratory tract and other organs
due to off-gassing media. Fill only in ventilated
rooms or under a suitable exhaust hood.
` ` When working with explosive substances, follow the
technical rules for combustible liquids (in accordan-
ce with TRBF – (German) Technical Rules on Com-
bustible Liquids) and wear appropriate protective
equipment (zone 0, see annex).
WARNING!
Possible sparking due to electrostatic discharge.
Danger of explosion if combustible liquids are used.
` ` Connect the earthing terminal before use (see
accessories).
` ` Wear the necessary protective clothing.
` ` The instrument must only be used within the
confines of applicable material resistance and for its
designated purpose. Any other type of use will affect
the warranty/guarantee.
NOTE!
Before using, the instrument has to be cleaned to
the extent of your (validated) cleaning process.
` ` Measures of manual cleaning have to be carried
out in the cleaning/desinfection area and under
consideration of occupational health and safety.
` ` Pay attention to the material resistance.
Safety instructions during and after use
` ` The instrument generates overpressure. Possible
bodily injury due to escaping liquids. Hold the shut-
off valve on the discharge hose closed.
` ` The instrument generates overpressure. If there are
differences in pressure, loud popping noises can be
heard with some types of containers.
` ` The instrument is not suitable for cleaning in a
dishwasher.
Layout and function
` ` The instrument is made of conductive material
(1.4301).
` ` The instrument is suitable for filling combustible
liquids in accordance with groups IIA and IIB (see
annex).
` ` Always use the instrument with pressure-resistant
containers (up to 220 l, >1 bar) for filling into open
containers (<1 l).
` ` When filling combustible liquids, always use an
antistatic set (see accessories).
The instrument is maintenance-free and suitable at
` `
a temperature range from 0 to 60 °C.
Point out any damage in the packaging to the freight
forwarder/supplier immediately.
WARNING!
Possible electrostatic discharge. Danger of explosi-
on if combustible liquids are used.
` ` Connect the earthing terminal before use (see
accessories).
` ` Wear the necessary protective clothing.
WARNING!
Some liquid will continue to run while the dischar-
ge hose is being screwed on. Bodily injury due to
escaping liquid.
` ` Close the shut-off valve on the discharge hose
before mounting.
Assembly
1. Guide the barrel screw connection  and riser
pipe  into the container and screw it together
finger-tight.
2. If necessary open the clamping lever  and adjust
the riser pipe. Then close the clamping lever and
lock the riser pipe in place.
3. Screw the discharge hose onto the riser pipe 
4. Attach the connecting hose to the foot bellows on
the instrument .




