Technical Specification - Apex Pro-care 2 Manual De Instrucciones

Pro-care 2 / English

10. Technical Specification:

Item
Power Supply (Note: See
rating label on the product)
Fuse Rating
Cycle time
Dimension (L x W x H)
Weight
Environment
Classification
Mattress
Model
Dimension (L x W x H)
Weight
Max. Support Weight
NOTE-
1. Consult the distributor or EU representative for further technical documents.
2. The specification is also suitable for other areas operating with same power supply.
3. Mattress dimension and weight is measured without foam cushion
4. The manufacturer reserves the right to modify the specification without notice.
Specification
AC 220-240V 50 Hz, 0.07A
T1AL, 250V
15mins, Fixed, non-adjustable
29.1 x 20 x 11.7 cm /11.4" x 7.9" x 4.6"
2.2 Kg / 5 lb
Atmospheric
700 hPa to 1013.25 hPa
Pressure
Operation: 10°C to 40°C (50°F to 104°F)
Temperature Storage: -15°C to 50°C (5°F to 122°F)
Shipping: -15°C to 70°C (5°F to 158°F)
Operation: 10% to 90% non-condensing
Humidity Storage: 10% to 90% non-condensing
Shipping: 10 % to 90% non-condensing
Class II, Type BF, IP21
Applied Part: Air Mattress
Not suitable for use in the presence of a flammable
anesthetic mixture (No AP or APG protection)
Specification
5" (12.7 cm ) Overlay Mattress
200x90x12.7cm/
78.7"x35.4"x 5"
7.3 Kg / 16.1 lb
180 Kg / 396.8 lb
(for 230V system)
200x85x12.5cm/
78.7"x33.5"x5"
7.1 Kg / 15.7 lb
12
200x80x12.5cm/
78.7"x32"x5"
7.0 Kg / 15.4 lb