cecotec GRANDHEAT 2050 Manual De Instrucciones página 33

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
ENGLISH
Fix the adjusting screw A on the upper air tunnel of the microwave.
Install the microwave in the cabinet.
Adjust the height of the adjusting screw A to keep a 1-mm gap between the adjusting screw A
and the top part of the cabinet.
Do no trap the power cord.
Make sure that the microwave is installed in the centre of the cabinet.
Fig. 9.
Open the door, fix the microwave in the cabinet with a screw B through the installation hole of
the trim kit. Then, fix the plastic cover onto the installation hole.
4. OPERATION
Clock setting
When the device is plugged in, it will beep once and the display will show "0:00".
Press the Clock button to set the time. The hour digits will blink.
Turn the knob to set the desired hour, from 00-23.
Press the Clock button. The minutes digits will blink.
Turn the knob to set the desired minutes, from 00-59.
Press the Clock button to save the time settings. ":" will flash and the time will light.
Note:
If the clock is not set, the current time will not be displayed when the device is turned on.
During the process of clock setting, press " Stop/Clear ", to go back to the previous status
automatically.
Microwave cooking
Press the Microwave button once. "P100" will be displayed on the screen.
Press the Microwave button several times or turn the knob clockwise to select the microwave
power: "P100", "P10", "P30", "P50" or "P80".
Press Start/+30sec/Confirm to confirm.
Turn the knob to set the desired cooking time. The set time should be 0:05-95:00.
Press Start/+30sec/Confirm to start cooking.
Example: Cooking at 80 % microwave power for 20 minutes.
Press the Microwave button once. "P100" will be displayed on the screen.
Press the Microwave button again or turn the knob to select 80 % microwave power.
Press Start/+30sec/Confirm to confirm. The screen will display "P80".
Turn the knob to set the desired cooking time: "20:00".
Press Start/+30sec/Confirm to start cooking.
64
GRANDHEAT 2050 BUILT-IN STEEL BLACK
0---1 min: 5 seconds
1---5 min: 10 seconds
5---10 min: 30 seconds
10---30 min: 1 minute
30---95 min: 5 minutes
Microwave/Grill/Combi power chart
Press
Display
Microwave
power
1
P100
100 %
2
P10
10 %
3
P30
30 %
4
P50
50 %
5
P80
80 %
Grill/Combi cooking
Press Grill/Combi once. "G" will be displayed on the screen.
Press Grill/Combi repeatedly or turn the knob to select the desired grill or combi cooking
program: "G", "C-1" or "C-2".
Press Start/+30sec/Confirm to confirm.
Turn the knob to set the desired cooking time, from 0:05 to 95:00.
Press Start/+30sec/Confirm to start cooking.
Example: Cooking at 55 % microwave power and 45 % grill power (C-1) for 10 minutes.
Press Grill/Combi once. "G" will be displayed on the screen.
Press Grill/Combi 4 times or turn the knob to select Combi. 1 mode.
Press Start/+30sec/Confirm to confirm. The screen will display "C-1".
Turn the knob to set the desired cooking time: "10:00".
Press Start/+30sec/Confirm to start cooking.
Note: Half-way through the cooking process, the device will stop operating and will beep twice.
This is to remind you to turn food over in order for it to be cooked evenly. Once you have turned
it over, press Start/+30sec/Confirm to continue cooking.
Timer
Press the Timer button. The display will show 00:00 and the clock indicator will light up.
Turn the knob to set the desired cooking time. The maximum time is 95 minutes.
Press Start/+30sec/Confirm to confirm.
When the set time is over, the device will beep 5 times.
Note: If the clock has been set (24-hour system), the display will show the current time.
ENGLISH
GRANDHEAT 2050 BUILT-IN STEEL BLACK
65

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido