RM-X170 remote commander
The remote commander can be used to operate the
audio controls. For menu operations, use the touch
panel.
Note
The white buttons in the illustration above are not
supported.
OFF
Turn the source off.
MONITOR OFF
Turn off the monitor.
To turn back on, press again.
EQ (equalizer)
Select an equalizer curve.
Number buttons (0 – 9)
CLEAR
(play/pause)
/ (previous/next)
/ (fast-reverse/fast-forward)
6
GB
///
Functions differ depending on the selected
source.
– Tuner: select a preset station or tune into a
station automatically.
– USB: select a folder or move to the previous/
next file.
ENTER
Enter the selected item.
SRC (source)
Change the source. Each time you press this
button, a selectable source is displayed in a
popup on the current display.
MODE
Select the radio band.
VOL (volume) +/–
Remove the insulation film before use.