Technical Information; Installation Considerations - Hansgrohe AXOR Serie Instrucciones De Montaje

Ocultar thumbs Ver también para AXOR Serie:
Tabla de contenido

Publicidad

This product is listed by IAPMO and is
approved for use in the US and Canada.
This unit meets or exceeds the following:
ASME A112.18.1
CSA B125.1
2
English

Technical Information

Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

Installation Considerations

• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• This trim is for use with rough 18113181 (not
included).
• The water stream from this faucet does not con-
tain any air. Hansgrohe recommends the use of
an Axor Massaud sink, or of another very deep
sink to keep water splashing to a minimum.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 psi
145 psi
120° - 140° F*
176°F*
1.1 GPM

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Axor massaud1811200118115001

Tabla de contenido