Parts And Components; Before Use; Product Installation - cecotec Bolero DressCode Wash&Dry 10700 Inverter Manual De Instrucciones

ENGLISH

1. PARTS AND COMPONENTS

Fig. 1.
1. Top cover
2. Control panel
3. Power cord
4. Drum
5. Service filter
6. Drain hose
7. Door
8. Detergent dispenser
9. Water supply hose
Accessories
Fig. 2.
1. Transport hole plug
2. Cold water supply hose
3. Hot water supply hose (optional)
4. Drain hose support (optional)
5. Instruction manual

2. BEFORE USE

Unpack the appliance and keep the original packaging carton and materials in a safe place. It
will help prevent any damage if the product needs to be transported in the future. In case the
original packaging is disposed of, make sure all packaging materials are recycled accordingly.
Make sure all parts and accessories are present and in good conditions. If not, contact
immediately the Technical Support Service of Cecotec.
Keep all packaging materials away from children.
Before using the wash machine, the product shall be calibrated.
Before washing the clothes for the first time, the product shall be operated in one round of the
whole procedures without the clothes inside.
Make sure that all pockets are emptied. Sharp and rigid items such as coins, brooches, nails,
screws or stones may cause serious damage to this machine.

3. PRODUCT INSTALLATION

Place the device on a flat, stable and dry surface. Make sure the product does not stand on the
power cord.
50
02339 Bolero DressCode Wash&Dry 10700 Inverter_Manual_YV_02210311.indd 50 02339 Bolero DressCode Wash&Dry 10700 Inverter_Manual_YV_02210311.indd 50 11/3/21 16:44 11/3/21 16:44