Troubleshooting - cecotec Bolero DressCode Wash&Dry 10700 Inverter Manual De Instrucciones

ENGLISH

6. TROUBLESHOOTING

Problem
The washing machine
does not start up
The door does not open
Water leakage
Detergent residues in the
box
Indicator or display does
not light
Abnormal noise
Errors
Error
E30
E10
E21
E12
62
02339 Bolero DressCode Wash&Dry 10700 Inverter_Manual_YV_02210311.indd 62 02339 Bolero DressCode Wash&Dry 10700 Inverter_Manual_YV_02210311.indd 62
Cause
The door is not closed
properly
The safety lock system is
activated
Bad connection between
pipes and water supply hose
or drainpipe.
Detergent is dampened or
agglomerated
The power PC board is
disconnected, or harness has
connection problem
Cause
Door is not closed properly
Water injecting problem while
washing
Overtime water draining
Water overflow
Solution
Restart after the door is
closed.
Check if there are clothes
stuck.
Unplug it and restart the
product.
Check and fasten water pipes
and hose.
Clean up outlet hose.
Clean and wipe the detergent
box
Check if the power is shut
down and the power plug is
connected correctly.
Check if the fixing bolts have
been removed.
Make sure the appliance is
installed on a solid, level
floor.
solution
Restart after the door is
closed.
Check if there are clothes
stuck.
Check if the water pressure is
too low.
Straighten the water pipe.
Check if the inlet valve filter is
blocked.
Check if the drainpipe is
blocked.
Restart the appliance.
11/3/21 16:44 11/3/21 16:44