cecotec Bolero DressCode Wash&Dry 10700 Inverter Manual De Instrucciones página 53

Load.
Close the door.
Add detergent.
Fig. 13.
Note: Detergent must be added in "case I" only after selecting pre-washing for machines with
this function.
Washing
Turn the device on.
Turn the knob to select the desired programme.
Select function or use the default one.
Press Start.
Fig. 14.
Note: If any of the default options is selected, step 3 can be skipped.
After washing
The appliance will beep, or the display will show "End".
Using the washing machine
Before each washing
The washing machine should be operated within a temperature range of 0-40 °C. If used under
0°C, the inlet valve and draining system may be damaged. If the machine is placed or operated
in rooms at 0 °C or below, it should be transferred to normal ambient temperature to ensure
the water supply hose and drain hose are not frozen before use.
Check the labels and the product instructions when using detergent before washing. Use
non-foaming or less-foaming detergent suitable for machine washing.
Check the label. Fig. 15.
Empty the pockets of the clothes to be washed. Fig. 16.
Knot the long strips, close zips or tighten button. Fig. 17.
Put small clothes inside a pillow slip. Fig. 18.
Turn easy-pilling and long-pile fabrics inside out. Fig. 19.
Separate clothes with different textures. Fig. 20.
Detergent dispenser
Fig. 21.
Pull out the dispenser to open it.
Pres-wash detergent
Main wash detergent
Softener
02339 Bolero DressCode Wash&Dry 10700 Inverter_Manual_YV_02210311.indd 53 02339 Bolero DressCode Wash&Dry 10700 Inverter_Manual_YV_02210311.indd 53
BOLERO DRESSCODE WASH&DRY 10700 INVERTER
ENGLISH
53
11/3/21 16:44 11/3/21 16:44