L.B.White FOREMAN 500 Instrucciones De Instalación página 3

STORING THE STACKING STANDS.
- Heaters must be unstacked prior to
storing of the stacking stands.
- Stands must be stored prior to putting the
heater into service.
1. Using a forklift, lift the heater so the wheels are 2
inches off the ground.
2. Remove one bolt and loosen the other bolt of the
stacking stands as shown in Fig. 6. Save removed
bolts, washers, and nuts to be used later.
FIG. 6
Removed Bolt
3. Pivot the stacking stands to align the holes of stacking
stands with the hole in the lower frame of the heater.
See Fig. 7.
FIG. 7
4. Use previously removed bolts, washers, and nuts to
secure stacking stands to the lower frame for storage.
See Fig. 8.
Foreman 500 Stacking Kit
FIG. 8
5. Tighten all bolts.
Loosen Bolt
Installation Instructions • Stacking Kit
3