Preventing.equipment.from.falling.over; Specifications - Pioneer KRP-TS02 Manual De Instrucciones

Preventing Equipment from Falling Over
• After installing the stand, be sure to take special care to ensure that the equipment will not fall over.
• Secure the plasma television to both the rack and the wall surface.
Stabilizing on a rack etc.
Use screws (those available on the market) to fix the Pioneer
display and television like shown in the diagram.
To.stabilize.the.equipment.on.
a.table,.use.screws.that.have.a.
nominal.diameter.of..mm.(/.
inch).and.that.are.at.least.0.mm.
(1/1.inch).long.

Specifications

External.dimensions:
KRP-TS02 ............. 552 mm (W) × 323 mm (H) × 350 mm (D) (21-23/32 in. (W) × 12-23/32 in. (H) × 13-25/32 in. (D))
PDK-TS33 ............ 550 mm (W) × 402 mm (H) × 349 mm (D) (21-21/32 in. (W) × 15-13/16 in. (H) × 13-3/4 in. (D))
PDK-TS33A .......... 552 mm (W) × 402 mm (H) × 350 mm (D) (21-23/32 in. (W) × 15-13/16 in. (H) × 13-25/32 in. (D))
Weight:
KRP-TS02 ............. 2.5 kg (5.6 lbs)
PDK-TS33 ............ 2.2 kg (4.9 lbs)
PDK-TS33A .......... 2.7 kg (6.0 lbs)
• The above specifications and exterior may be modified without prior notice to improve the product.
Using a wall for stabilization
1
Attaching.falling.prevention.bolts.(hooks).
to.the.Pioneer.display.and.television.
2
Using.strong.cords.to.firmly.stabilize.it.
appropriately.and.firmly.to.a.wall,.pillar,.
or.other.sturdy.element.
Perform this work in the same way on the left and right
sides.
Use.hooks,.cords,.and.fittings.that.
are.available.on.the.market.
Recommended.hook:.
..Nominal.diameter.M
..Length.1.mm.to.1.mm.(1/.inch.to./.inch)
1
En